Technidrive Lowering Winch

• Product features

• Product description

  Heavy-Duty Lowering Winch for 10mm Wire RopeUpgrade your lifting capabilities with our state-of-the-art Heavy-Duty Winch built for reliability and efficiency. This winch is specifically designed for use with 10mm wire rope and boasts a Safe Working Load (SWL) of 6kNm torque equating to an impressive 4531kg combined line pull on the third layer.Key Features:Safe Working Load (SWL): 6kNm torque 4531kg combined line pull on the 3rd layer Maximum Power Rating: 9kW SOLAS Compliant Safety Factor: Minimum 4.5 Dynamic Load Control: Configure for double-purchase with a dynamic load not exceeding 1.2x maximum static load in case of sudden motor stoppage or brake application during operations (refer to Figure 3 for details) Execution Type: Right-hand configuration (as shown in the pictorial drawing with the brake in its nominal position) Estimated Nominal Mass: 600kg (dry) Oil Capacity: 3.3 liters Gravity Lowering Speed: Adjusted to nominal 40m/min (0.67m/s) with a 10% reduction during the lowering phase on the 1st layer of the drum Hoist Speed: Nominal electric-driven hoist (recovery) speed of 6.4m/min (0.1m/s) on the first layer (subject to 10% tolerance) Oil Specification: Follow manufacturer's recommendation typically Mobil SHC 626 for temperatures between -30 to +65 degrees Celsius and a viscosity of 68 Additional Features:Pull Out Load: Not more than 50kg on the third layer of the drum Integral Pre-wired Limit Switch: Provided for cranking handle Control Box: Pre-mounted rigidly to the winch using suitable metal brackets Ratchet: Provided and mounted on the left-hand side in suitable brackets Weak-Link Drum Locking Device: Array of holes around the drum periphery for attaching a low breaking strength cord (10kg to 50kg) to prevent drum rotation Pendant Remote Controller: Minimum IP55 with push-button switch for hoist function and emergency stop hard-wired to the control box with 6.5m of cable Limit Switches: 4 pre-wired and identified (L.S.1 L.S.2 L.S.3 etc.) as per Figure 1 normally closed type Schmersal reference no. "T. 422-01y-M20-1090 / 2186" with actuators provided and painted as per the winch specifications Installation:Entire system pre-wired including a 5m long supply cable from the control box